External S-Meter - Ranger RCI-2950 Service Manual

EXTERNAL S-METER

The RCI does not have any external plug to use a S-Meter. With this mod, you can add one. If you compare most of the
base rig which have this option, you can see that everything is around VR1 & VR2 squelch components.
Ths signal you need to catch for the external meter is present on the cathode of the diode D14. All you have to do is to
add a female jack 3,5 plug to the back of the rig. You will put a wire from D14 cathode to the central pole of the jack
plug.
www.radioaficion.com