Modify Your Rci For 26 Mhz -32 Mhz Operation; Frequency Modification On New Versions - Ranger RCI-2950 Service Manual

MODIFY YOUR RCI FOR 26 Mhz -32 Mhz OPERATION
The RCI was designed to be a wide range tranceiver. It is really. With a nice little modification you can expand this rig from
26 Mhz to 32 Mhz.
All you have to do is to locate a black jumper onto the LCD electric board. This jumper is called S601. Just move it to the
other position.
Don't forget to re-program your scanning lower frequancy and scanning upper frequency with these new limits otherwise you
will not be able to reach the limit frequencies.

FREQUENCY MODIFICATION ON NEW VERSIONS

Remove the bottom cover to gain access to the small PC board immediately behind the front panel. There will be a set of
jumpers marked "J1" and "J2". Move the jumper from the top two pins to the bottom two pins. Frequency coverage will now
be expanded to 26mhz-29.7mhz.
Press the "MAN" button to switch between CB operation and normal operation.
Press the "SHF" button while in CB mode to switch between CB channel readout and frequency
readout.