Table of Contents
Advertisement
Dismount Button
Press to safely remove
USB drives from the
DSM-600.
D-Link DSM-600 Quick Install Guide
Reset Button
Pressing the reset button for 10 seconds with a paper
clip will restore the unit to the original factory default
settings. The button is inside the hole to prevent an
accidental reset.
Power Receptor
Receptor for the supplied power adapter.
LAN Port
Connects to your Ethernet network. The
LAN port supports Auto MDI/MDI-X,
allowing you to connect a straight-through
or crossover cable.
USB 2.0 Ports
Use these ports to connect USB 2.0 drives.
USB 1.1 drives may also be connected but
will be limited to USB 1.1 speed.
Fan/Vent
Fan to cool the internal hard
drive.
Advertisement
Table of Contents
