View Battery Status; Delete Fingerprints; Toggle Interior Light On/Off - Vaultek VT20i Instruction Manual

12 Vaultek™ VT20i

View Battery Status

Press and hold '5'

Delete Fingerprints

Press and hold '3' and '5'
then enter the
master code.
Toggle Interior
Light ON/OFF
Press and hold '1'
To check the battery level press and hold the '5' key on
the keypad (3 seconds). Keys from '1' to '4' will glow
GREEN or RED to indicate the battery level.
If 4 digits glow green: 80%-100%
If 3 digits glow green: 60%-80%
If 2 digits glow green: 40%-60%
If 1 digit glows green: 20%-40%
If 1 digit glows red: 2%-20%
If 1 blinks red: less than 2%
To delete fingerprints press and hold keys '3' and '5' at
the same time for 3 seconds until all keys (1-5) light up
RED then enter your master code. This will remove all the
fingerprints. You can delete individual fingerprints in the
Vaultek™ app.
To toggle the interior light ON/OFF press and hold the '1'
key for 3 seconds. With the light toggled to ON you can
press the "LIGHT" button inside the safe to illuminate the
light and can also adjust the interior light in the app. If
the light is toggled OFF these feature will be disabled.