Safety Warnings - Megger DET10C User Manual

Use of rubber gloves is good safety practice even if the equipment is properly operated and
grounded.
Safety is the responsibility of the operator.
Use extreme caution when using the instrument around energised electrical equipment.
Do not attempt to use the ground tester to twist or pry the ground electrode or ground wire away
from the equipment being grounded.
All metal objects or wires connected to the electrical system should be assumed to be lethal until
tested, the grounding system is no exception.
Symbols used on the instrument are:
F
Caution: Risk of Electric Shock
G
Caution: refer to accompanying notes
t
Equipment protected throughout by Double Insulation (Class II)
c
EN 61010-2-032 CAT III 300V, CAT II 600V Pollution Degree 2
1
G

SAFETY WARNINGS