Auto Tuning Feature - RCA HDTV User Manual

Main Menu Parental Controls
0
Go Back
Front Buttons Blocked
1
Lock TV
Front Buttons Unblocked
2
Video Input List
When the buttons on the TV are blocked and the TV is
3
Cable Channel List
locked, only the remote will control the TV. This keeps
4 children from playing with the buttons. It also keeps
Antenna Ch. List
children from watching TV when a guardian is not
5
USA V-Chip
present (you must hide the remote for this to be effective.)
6
Canada V-Chip
Note: If power to the TV is lost for a prolonged time (e.g.,
due to a power outage) the buttons become unblocked.
7
V-Chip Unrated
8
Front Button Block
Press OK to block (disable) the buttons on the front of the TV.
Only the remote will control the TV.
Main Menu Connections
0 Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Signal Source
VCR2
Front Input
4
Video Input Setup
DVD
5
Auto Tuning
Front Input
6
Special Features
SAT-CABLE (Satellite or Cable Box)
Front Input
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
ON•OFF
VCR
DVD AUDIO AUX•HD
With the Auto Tuning feature, you can set up
the TV to tune to the channel or input you want
to watch by pressing that component's button.
Auto Tuning for the TV button cannot be set.
Chapter 3
AUDIO (Audio Receiver/Amp)
Front Input
RCA SAT2
Front Input
TV
SAT•CABLE
Using the TV's Features
Front Button Block
Selecting this option lets you block (disable) or unblock (enable) the TV's
front buttons. The remote still tunes to any channel. Front Panel Block
can:
• Keep children from watching TV when the parent is not present.
• Keep young children from playing with the buttons on the TV.
(When using this as a Parental Control method, you should remove
access to any remote that is capable of operating the television.)
Don't forget to lock the TV after you select Blocked. If you do not, the
front panel block will not take effect.
Note: If power to the TV is lost for an extended period, the buttons
become unblocked. Blocking the front buttons does not disable the
front input jacks.

Auto Tuning Feature

The way you set up the Auto Tuning feature in the TV's menu
corresponds to the component buttons on the remote and the way you
have each component connected to your TV. When you set auto tuning,
you're telling the TV what channel or input to tune to when you press
the VCR, DVD, AUDIO, AUX•HD, or SAT•CABLE button on the remote
control. This is especially useful for going directly to an input like
HDMI/DVI.
Notes: The AUX•HD button by default is set up for an RCA HDTV Tuner
receiver.
If you have two RCA satellite receivers, you can control each separately.
Program the second receiver with the AUX•HD button using the 5001
code. Then use the RCA SAT2 option in the auto tuning menu to set auto
tuning.
1. Press MENU (the Main Menu appears).
2. Highlight Connections and press OK.
3. Highlight Auto Tuning and press OK.
4. Highlight the component button fi eld and continually press OK to
scroll through the selection of inputs.
The choices and a brief explanation follow:
Choose this if you don't have this particular
Not Connected
component connected to the TV, or if you don't want the TV to
automatically tune to the correct channel when you press one of the
component buttons on the remote.
Channel 2, 3 or 4 Cable Input
CABLE INPUT jack on the back of the TV, and you want the TV to tune
to channel 2, 3, or 4 when you press the corresponding button on the
remote. Reminder: make sure the component's Channel 2/3 or 3/4 switch
is set to match the channel you choose in Auto Tuning.
Component is connected to the
41