Table of Contents
Advertisement
Up to 20 tracks can be programmed in the
desired order.
< Insert a disc and select "CD" before beginning
programming.
1
Press the MEMORY button in the stop mode.
"MEMORY" blinks, track number and "P-01"
appears on the display.
2
Press the SKIP/SEARCH button (.m or
,/) to select a track.
3
Press the MEMORY button.
The track is programmed, and "P-02" is displayed.
Repeat steps
2
and
< You can program up to 20 tracks.
< To cancel the program mode, press the STOP
button (H).
12
Programmed Playback
MEMORY
3
to program more tracks.
H
G/J
.m/,/
4
When the selection of track numbers is
completed, press the PLAY/PAUSE button
(y/J) to start program playback.
< If one of the following buttons is pressed, program
mode will be canceled and all the programmed
contents are erased:
OPEN/CLOSE button (L)
POWER switch
FUNCTION button
A
To cancel the program playback mode
Press the STOP button (H).
"MEMORY" indicator disappears, but the
programmed contents aren't lost.
To return to the program mode, press the
MEMORY button.
B
To check the programmed order
In the stop mode, press the MEMORY button
repeatedly to show the track numbers that have
been stored in memory.
Advertisement
Table of Contents
