How To Use: Steam Cleaner; Filling Water Tank; Removing And Filling Solution Tank; Using The Clean Control - Hoover WH20100 Owner's Manual

Turn off, unplug, and allow steam cleaner to cool before servicing or filling tank. Do not clean over
electrical outlets. Use only with Hoover

FILLING WATER TANK

CAUTION
!
Use caution when removing Water Fill Safety Cap.
Even when cap is able to be turned the steam
cleaner may still be hot, especially the metal ring.
IMPORTANT
Do not add cleaning solution to Water Tank.
„ Place the steam cleaner on a level surface. If you
are filling the Water Tank during or after use, see
"Refilling Water During Operation" instructions
on page 7. After you have ensured the steam
cleaner has cooled and pressure has been
released, the Water Fill Safety Cap should turn
freely for removal. Unscrew the Water Fill Safety
Cap counter- clockwise (3.1).
„ Add 300ml (10oz) water into the Measuring
Cup, as indicated on cup, and pour the water into

REMOVING AND FILLING SOLUTION TANK

IMPORTANT
Do not mix Hoover
solution with any other cleaning solution.
„ Squeeze tabs on side of Solution Tank to slide
tank out of steam cleaner as shown (3.3).
„ Remove cap from the top of Solution Tank (3.4).
„ Fill the Solution Tank with recommended Hoover
SteamPlus™ Cleaning Solution using Funnel*
and Measuring Cup. FOR OPTIMAL CLEANING
RESULTS, add the solution directly into the
solution tank of your Hoover
FOR REGULAR STRENGTH, add equal parts
warm tap water (not boiled) and cleaning solution
to solution tank, based on tank capacity of your
specific appliance.
„ Replace cap ensuring that it is fully sealed.

USING THE CLEAN CONTROL

(When using with Hoover
„ The Clean Control
of cleaning solution that is added to the steam.
It does not adjust the amount of steam, only the
cleaning solution.
„ If you wish to clean with steam alone, simply turn
the Clean Control
time you press the Steam Trigger, you will
release steam alone.
*Select models

3. HOW TO USE: STEAM CLEANER

!
®
!
SteamPlus™ cleaning
®
Steam Cleaner.
®
SteamPlus™ Cleaning Solution)
®
Dial controls the amount
TM
Dial to "OFF". Now every
TM
WARNING
SteamPlus Cleaning Solution.
TM
3.1
the Water Tank (3.2). (Max. capacity of the tank is
300ml (10oz). Do not overfill the Water Tank.
Allow space to be left at the top).
„ Overfilling may cause excess water to be emitted
from the steam cleaner. When refilling the steam
cleaner, make sure to empty all remaining water
from the Water Tank before refilling
„ Re-install the Water Fill Safety Cap in a clockwise
direction and tighten until completely sealed.
„ DO NOT OVERTIGHTEN SAFETY CAP
3.3
®
„ Replace Solution Tank by sliding it into
opening and applying light pressure to the back of
the tank until tabs on side of the tank lock into body
of steam cleaner.
Do not leave Clean Control
settings. Make sure the dial clicks into the
proper setting before use.
DIAL
TM
„ If you wish to clean using Hoover
Cleaning Solution, simply turn the Clean
Control
pressing the Steam Trigger, the steam cleaner
will release the amount of solution that is
indicated on the Clean Control
as steam.
6
!
3.2
3.4
IMPORTANT
Dial to the desired setting. Now when
TM
*
Dial in between
TM
SteamPlus™
®
Dial as well
TM