ABB REB500 Communication Protocol Manual page 24

Section 3
IEC 60870-5-103
16
Table 15 Diagnostic event
ENTRY No. Group 64 (0x40)
0 (Heading) Diagnostic information
1 BBP (Busbar protection)
2 ITT (Intertripping)
BCF (Binary input and output configuration
3
facility)
4 DIA (Diagnostic)
5 TGR (Test generator)
6 EMI (External man/machine interface)
7 LMI (Local man/machine interface)
8 DAC (Data access)
9 TIM (Time management)
10 DBS (Database system)
11 SIG (Signal processor)
12 EVR (Event recording)
13 RFS (Remote file system)
14 SPR (Signal pre-processing and recording)
15 MBA (Multi-function bus administrator)
16 OCP (Overcurrent protection)
17 BFP (Breaker failure protection)
18 DRR (Disturbance recorder)
19 MPL (Multi functional process bus library)
20 EFP (End-fault protection)
21 PDF (Pole discrepancy function)
22 BOC (Binary input/output control)
23 BPP (Binary pre-processing)
24 DIE (Diagnostic extensions)
25 DRD (Disturbance recorder dispatcher)
26 EVA (Event and alarm handling)
27 GPI (General purpose interface)
28 LAC (LON application converter)
29 IAC (IAC application converter)
30 CMD (Command processor)
31 LPL (LON protocol layer)
32 TRC (Traceability)
33 BP (Bay protection)
Table 16 Used attributes of ASDU 10 for diagnostic events
COT CAA
1 Spontaneous 0 / 1..60
With the exception of the header (entry 0), the current values of the entries are not
available on request. The response to the corresponding generic read command is
therefore COT 43 'invalid data response to generic read command'.
REB500 CU / REB500 BU
Communication Protocol Manual, IEC 60870-5-103
1MRK 511 371-UEN
FUN
254 Generic
Distributed busbar protection REB500