Download  Print this page

Recording With The 4k Photo Function; Recording Mode - Panasonic Lumix DC-ZS200 Basic Owner's Manual

Hide thumbs

Advertisement

Table of Contents

Recording with the 4K Photo function

Recording mode:

You can take burst pictures of approximately 8 million pixels with a burst rate of
30 fps. You can select and save a frame from the burst file.
• To record pictures, use a UHS Speed Class 3 card.
1
Press [
] button
2
Press
to select the recording method and press [MENU/SET]
[4K Burst]
[4K Burst(S/S)]
"S/S" is an
abbreviation of
"Start/Stop".
[4K Pre-Burst]
For capturing the best shot of a fast-moving subject
Burst recording is performed while the
shutter button is pressed and held.
• Recording will start approximately
0.5 seconds after you press the shutter
button fully. Therefore, press the button
fully slightly in advance.
Press and hold
Recording is performed
For capturing unpredictable photo opportunities
Burst recording starts when the shutter
button is pressed and stops when pressed
again.
Start (First)
Stop (Second)
Recording is performed
For recording as needed whenever a photo opportunity arises
Burst recording is performed for
approximately 1 second before and after
the moment that the shutter button is
pressed.
Approximately 1 second
Recording is performed
Recording
DVQX1409 (ENG)
29

Advertisement

Table of Contents

   Also See for Panasonic Lumix DC-ZS200

This manual is also suitable for:

Lumix dc-tz220Lumix dc-zs220

Comments to this Manuals

Symbols: 0
Latest comments: