Adjusting The Focus After Recording ([Post Focus] / [Focus Stacking]) - Panasonic Lumix DC-ZS200 Basic Owner's Manual

Adjusting the focus after recording
([Post Focus] / [Focus Stacking])
Recording mode:
You can record 4K burst pictures while changing the focus point and then select a
focus point after recording. This function is best for non-moving subjects.
• To record pictures, use a UHS Speed Class 3 card.
• We recommend using a tripod to perform [Focus Stacking].
1
Press [ ] button
2
Press to select [ON] and press [MENU/SET]
3 Determine the composition and press the
shutter button halfway
• Auto Focus activates and automatically detects the focus point on the screen.
• If there is no focus point on the screen, the Focus indicator ( ) blinks and
you cannot record.
From halfway pressing the shutter button to completion of recording
• Do not change the distance to subject or the composition.
4 Press the shutter button fully to start
recording
• The focus point changes automatically while recording. When the recording
progress bar ( ) disappears, recording automatically ends.
• The data will be saved as a single file in the MP4 format.
• If [Auto Review] is set, a screen will automatically appear that lets you select
the focus point. (→34)
■
Canceling [Post Focus]
Select [OFF] in step
2
.
Recording
DVQX1409 (ENG)
33