Charging the battery
• The battery that can be used with this unit is DMW-BLG10PP.
• We recommend charging in a location where the ambient temperature is
between 10 °C and 30 °C (50 °F to 86 °F).
Insert the battery into the camera.
Make sure that the camera is turned off.
• Always check the direction of the socket, and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the socket could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
• This terminal is located at the bottom when the
camera is in an upright position.
Charging lamp (Red)
AC adaptor (supplied)
To the electrical outlet
USB connection cable
Turn on the computer.