Debug - THOMSON SpeedTouch 605 User Manual

Chapter 5
Expert Configuration

5.7.6 Debug

Status page
Statistics page
Logging page
Tear Down All Tunnels
182
This page shows the status of the IKE Security Association (Phase 1) and the IPSec
Security Association(s) (Phase 2). For an operational VPN connection, both an IKE
Security Association and an IPSec Security Association should be active.
This page shows the amount of traffic carried over the IKE Security Association
(Phase 1) and the IPSec Security Association(s) (Phase 2).
On the Logging page you can monitor the received and transmitted messages of
the IKE and IPSec negotiations.
Proceed as follows:
1
Browse to Expert mode > VPN > Debug > Logging.
2
Select the desired level of Trace Detail. Select high to see the most detailed
level of logging.
3
Start the VPN connection.
4
Browse again to Expert mode > VPN > Debug > Logging.
On this page you can halt all established VPN tunnels.
E-DOC-CTC-20051017-0151 v1.0