Sla - THOMSON SpeedTouch 605 User Manual

5.2.9 SLA

Overview
Ping
Add/delete a ping test
Modify ping test properties
E-DOC-CTC-20051017-0151 v1.0
The Service Level Agreement (SLA) page allows you to view and configure ping
and traceroute tests.
The page contains two sections:
Select Ping to view/configure and perform ping tests.
Select Traceroute to view/configure and perform traceroute tests.
The Ping table provides a list of configured ping test entries.
By default no ping tests are configured. To add a ping test see
test.
Select a ping test entry to:
Modify ping test properties.
Perform a ping test and view test results and history (see
results).
Delete the entry (see Add/delete a ping
To add a ping test entry:
1
Click New (if an entry is currently selected, click Cancel first).
2
Type a name for the ping test entry.
3
Type the host name or IP address of the target to ping.
4
Click Apply.
To delete a ping test:
1
Select the ping test entry to delete.
2
Click Delete.
To modify a ping test entry:
1
Select the ping test entry.
2
Click Modify.
3
Make your changes.
4
Click Apply to apply your changes to the ping test entry.
Add/delete a ping
Ping tests and
test).
Chapter 5
Expert Configuration
117