Samsung VP-D73 Service Manual page 163

2. 조정 영문 2001.7.4 2:7 PM 페이지2-2
2-3 Maintenance
Carry out the following periodic maintenance
checks in order to fully exercise all functions,
operations and tape.
After repairing, service the set as follows:
2-3-1 Cleaning of Drum Assembly
1. Gently apply lens tissue soaked in ethyl
alcohol to the Drum assembly.
Clean the Upper Drum assembly while
rotating it slowly counterclockwise(by
h a n d ) .
N o t e: Do not rotate the motor by power or
rotate the Upper Drum assembly clockwise.
Also, the Head tip will be damaged if the lens
tissue is moved in a perpendicular direction.
Be sure to follow these instructions when
cleaning the Drum Ass' y
2-2
P2
P1
P3
2-3-2 Cleaning of Tape Path
1. In EJECT mode, clean the tape path
system(from Pole Tension P1 through Pole
Review P7, Pinch Roller and Capstan
Shaft) and the Lower Drum. Using the
lens tissue soaked in ethyl alcohol.
Note: Make sure that no oil or grease
adheres to the lens tissue.
Fig 2-3
P4
P6
P7
P5
PINCH ROLLER
Sumsung Electronics