Table of Contents
Advertisement
When using without authentication, leave the password
blank.
Should any of the following points apply, a warning
message will be displayed.
1.
When the password does not satisfy the
recommended conditions.
2.
When the default password has not been changed
3.
When the new password is the same as the old one
4.
No password (blank)
Notes
●
It is recommended that do not set the same password
as the current password or the same value as the
factory setting as the New password.
●
For PJLink specifications, visit the Japan Business
Machine and Information System Industries
Association (JBMIA) website:
http://pjlink.jbmia.or.jp/english/index.html
●
No member of the Panasonic Corporation or its
affiliate companies will ever ask directly for your
passwordnew
Never divulge your password should you ever receive
such a request.
Early Warning Software
This unit supports "Early Warning Software" which
monitors the status of devices (projectors or flat-panel
displays) connected to an Intranet, device failures are
reported and the detection of predicted abnormality
allows advance warning to be given.
The maximum number of devices that can be registered
for monitoring depends on the type of license. Up to
2048 devices can be registered and used free for 90
days after the PC installation has been completed.
●
For more details, visit the following website:
https://panasonic.net/cns/prodisplays/products/swa100/index.
html
Note
●
When using this software, set "Eco mode" to
"Normal". (
See page 31)
38
English
Multi Monitoring & Control Software
This unit supports "Multi Monitoring & Control Software"
which monitors and controls devices (projectors or flat-
panel displays) connected to an intranet.
For details, see the following website.
https://panasonic.net/cns/prodisplays/download/
software/index.html
Note
●
When using this software, set "Eco mode" to
"Normal". (
See page 31)
Advertisement
Table of Contents
