Table of Contents
Advertisement
Safety Precautions
WARNING
■
Setup
Optional accessory
Installation Mount
•
TY-VK49LV2 (for TH-49LFV8)
TY-VK55LV1、TY-VK55LV2 (for TH-55LFV8)
Cover-frame Kit
•
TY-CF55VW50 (for TH-55LFV8)
Early Warning Software
•
ET-SWA100 series *1
Video Wall Manager
•
TY-VUK10 *2
1: The part number suffix may differ depending on the
*
license type.
2: Supports Ver 1.7 or later
*
Small parts may be accidentally swallowed by small
children and are a choking hazard. Keep small parts
away from young children. Discard unneeded small
parts and other objects. This includes plastic bags and
sheets which present a suffocation hazard for small
children.
Do not place the Display on a sloping or unstable
surface and make sure the base does not overhang
an edge.
The Display may fall off or tip over.
•
Install this display in a location with minimal
vibration and which can support its weight.
If the unit falls it may cause injury and certainly may
•
result in malfunction.
Do not place any objects on top of the Display.
If a foreign object or water gets inside the Display, a
•
short-circuit may occur which could result in fire or
electric shock. If any foreign object gets inside the
Display, please consult your local Panasonic dealer.
Transport only in an upright position!
Transporting the unit with its liquid crystal panel
•
facing upwards or downwards may damage the
internal circuitry.
Make sure the ventilation openings in the unit are
not obstructed in any way, by curtains or other
objects.
See page 8 for the requirements for sufficient
ventilation.
Caution - For use only with UL Listed Wall Mount
Bracket with minimum weight/load 30.0
When installing the Display vertically;
When installing the Display vertically, be sure that the
6
English
Power Indicator is on the lower edge. Heat is generated
and it may cause fire or damage to the Display.
Cautions for Wall Installation
Installation should be carried out by a professional.
•
Installing the Display incorrectly may lead to an
accident that results in serious injury or even death.
When installation is to be made on a wall, a wall
•
hanging bracket that conforms to VESA standards
must be used.
VESA 400 mm × 400 mm
Before installation, make sure the mounting location
•
has enough strength to support the weight of the LCD
display and the wall hanging bracket.
If you decide to no longer use the Display on the
•
wall, engage a professional to remove it as soon as
possible.
When mounting the Display on a wall, make sure
•
the mounting screws and power cable do not make
contact with any metal objects inside the wall. An
electric short circuit or shock might be the result of
contact with metal in the wall.
Do not place the display where it may be affected by
salt or corrosive gas.
Doing so may cause the display to fail due to
•
corrosion. Also, the unit may malfunction.
Do not install the Display where it is exposed to
direct sunlight.
The liquid crystal panel may be adversely affected by
•
direct sunlight .
■
When using the LCD Display
The Display is designed for 110 - 127 or 220 - 240 V
AC, 50/60 Hz.
Do not cover the ventilation holes.
Doing so may cause the Display to overheat. This
•
may damage the display or even cause it to catch fire.
Do not stick any foreign objects into the Display.
Do not insert any metal or flammable objects into the
•
ventilation holes, or drop them on the Display. Doing
so can cause fire or electric shock.
Do not remove the cover or modify it in any way.
(66.1 lbs).
90
Advertisement
Table of Contents
