Connections - Panasonic TH-49LFV8U Operating Instructions Manual

Connections

AC cord connection and fixing
Back of the unit
TH-49LFV8
AC cord fixing
Plug the connector into the display unit.
Plug the connector until it clicks.
Note
● Make sure that the connector is locked on both the
left and right sides.
Unplug the AC cord
Unplug the connector pressing the two knobs.
Notes
●
When disconnecting the AC cord, be absolutely sure
to disconnect the AC cord plug at the socket outlet
first.
● The supplied AC cord is for this unit exclusive use. Do
not use this for other purposes.
TH-55LFV8
AC cord (supplied)
Cable fixing
Note
● 3 clampers are supplied with this unit. Fix the cables
at 3 locations using the holes for clampers as shown
below.
If you need more clampers, purchase them from your
dealer. (Available from the customer service)
TH-49LFV8
1. Attach the clamper
To remove from
the unit:
2. Bundle the cables
hooks
To loosen:
knob
TH-55LFV8
hole
Insert the clamper in a
hole.
snaps
Keep pushing both side
snaps and pull out the
clamper.
Set the tip in the hooks
and tighten.
Keep pushing the knob
and pull out the tip.
English
15