Table of Contents
Advertisement
I N I T I A L I N S P E C T I O N A N D A S S E M B L Y
Carefully unpack the instrument and accessories, and
inspect for shipping damages. Notify your local dealer or
YSI immediately (+1 937-767-7241 or info@ysi.com) of any
damages or missing parts. Save packing materials until
satisfactory operation is confirmed.
B E F O R E F I R S T U S E
A. Install the Batteries
1.
Remove the battery cap at
the top of the unit.
2.
Insert the set of batteries
(included), ensuring correct
polarities as marked.
3.
Securely replace battery cap.
Note: If replacing old batteries,
see
Battery
Maintenance section.
B. Soak the Electrode
1.
Remove the electrode cap covering the pH/EC1030A
meter electrode.
2.
Soak electrode in pH 4 buffer for 10 minutes before
first use or after storage. Depending on the age of the
electrode, you may need to soak longer.
C. Setup and Calibrate the Electrode and Meter
The pH/EC1030A must be setup and calibrated before first
use. Please follow the instructions detailed in the section
Using the pH/EC1030A.
Disposal
in
the
2
Advertisement
Table of Contents
