Garmin G1000 NXi Pilot's Manual page 345

Relative Motion
Vectors
Enabling/disabling the Motion Vector display:
1) Select the Traffic Map Page.
2) Select the Motion Softkey.
3) Select one of the following softkeys:
Absolute: Displays the motion vector pointing in the absolute direction.
•
Relative: Displays the motion vector relative to own aircraft
•
• Off: Disables the display of the motion vector.
Or:
1) Select the Traffic Map Page.
2) Press the MENU Key.
3) Turn the small FMS Knob to highlight 'Relative Motion', 'Absolute Motion' or 'Motion Vector Off'.
4) Press the ENT Key.
Adjusting the duration for the Motion Vector projected time:
1) Select the Traffic Map Page.
2) Select the Motion Softkey.
3) Select the Duration Softkey.
4) Select a softkey for the desired duration (30 SEC, 1 MIN, 2 MIN, 5 MIN).
5) When finished, select the Back Softkey to return to the Traffic Map Page.
190-02177-00 Rev. A
Figure 6-78 Traffic Map Page with Relative Motion Vectors Enabled
Garmin G1000 NXi Pilot's Guide for the Cessna Nav III
HAZARD AVOIDANCE
Relative Motion Vectors
selected
331