Test Id Setting - Kanomax 6710 Instruction Manual

5.1.1 Test ID setting

A Test ID consists of a group of Cycles (or Samples). A Test ID can contain up to 100 Cycles.
The maximum number of Test IDs is 30. Any new Sample will be saved to the current Test ID. You
can change the current Test ID at any time to keep your data organized. Press
"MENU" and the settings will not be saved. Refer to the figures as below:
Test Settings
1. Test ID
1
2. Test Mode
Single Single Single Single
3. Unit
4. Act.Std
Std Std Std Std
Test ID
1. Select ID 1
20
2. Add New ID
No
30
Total ID：
Under option 1, press
Test ID
1. Select ID
20
2. Add New ID
No
30
Total ID：
Under option 2, press
Test ID
1. Select ID
20
2. Add New ID
No
Yes
30
Total ID：
MOVE
Under "Test Settings", press
SET
item 1 "Test ID".
OK
Press
BACK
MOVE
Press
SET
Press
OK
BACK
.
.
Press
ADJ
Press
SET
OK
BACK
.
.
Press
MOVE
Press
SET
OK
BACK
to change the "Test ID" setting.
or to select a menu item.
to enter a setting.
or to increase or decrease the Test ID No.
for save your changes，or press
or change the settings.
to save your changes, or press
14
to return to the
or to choose option
to quit.
to quit.