General; Description Of C Ontrols - HP 465A Operating And Service Manual

Model 465A
3-1. GE NERAL.
3-2. The Model 465A Amplifier can be operated as:
(1) a general purpose amplifier/preamplifier, (2)
oscilloscope preamplifier, (3) oscillator power ampli-
Ensure that transients greater than ±200
vdc or ±25 vdc are not applied to the
input or output terminals, respectively.
Otherwise damage to the Model 465A may
result.
01775-1
SECTION
OPERATING INSTRUCTIONS
III
fier, (4) impedance converter (5
and (5) in-system amplifier unit.
3-3. DESCRIPTION OF CO NTROLS.
3-4. Figure 3-1 gives a description of the front
panel and rear panel controls for the 465A.
Ensure that common (J,) terminals are
connected before INPUT or OUTPUT
terminals. Otherwise damage to the
Model 465A may result due to
sients.
Section III
Paragraphs 3-1 to 3-4
10 8 power gain)
x
tran­
3-1