Step 2 Setting The Hardware; Connecting The Pc Card To The Connecter Cable - Contec GP-IB(CB)F User Manual

2. Setup

Step 2 Setting the Hardware

This section explains how to setup the PC card and mount the card in the PC.
Ensure that the PC you are using has a PC Card Standard compliant CardBus Type II PC card slot.

Connecting the PC Card to the Connecter Cable

Plug the PC card connector end of the supplied cable [CB-GPIB] into the PC card.
CAUTION
- When plugging in the cable, align the cable connector with the PC card socket and push firmly into
place. Do not apply any excessive force to the socket on the PC card as this may damage the socket
or result in a bad connection.
- Do not insert or remove the cable or PC card while the power is turned on to the PC.
PC Card
PC Card Socket Side
Figure 2.1. Connecting the PC Card to the Connecter Cable
16
Locking Spring
Locking Metal Fitting
Connection Cable
GP-IB(CB)F, GP-IB(CB)FL