Bosch BMS500-AAU009-0AHXXA Service Manual page 65

Service Manual
Removing the compressor
1. First remove the panel plates and electrical parts.
2. Recover refrigerant from the refrigerant circuit.
3. Remove the discharge pipe and suction pipe with a burner.
Figure 101
4. Remove the hex nuts and washers fi xing the compressor on bottom plate.
Figure 102
5. Lift the compressor from the base pan assembly.
Bosch Thermotechnology Corp. | 02.2018
Bosch Climate 5000 AA Series Split Type Ductless Air Conditioner / Heat Pump | 65
For model: BMS500-AAS024-1CSXXA
Removing the panel plate
1. Stop operation of the air conditioner and turn "OFF" the power breaker.
2. Remove the big handle fi rst,then remove the top cover (7 screws).
3. Remove the screws of front panel(11 screws)
Screws of top panel (3 screws, 1 screw is under the big handle)
11 screws of front panel
Figure 103
4. Remove the screws of the right side panel(13 screws)
Figure 104
4 screws
of the big
handle
Data subject to change