Hitachi SB 10S2 Technical Data And Service Manual page 13

(5) Removal of the Stator Ass'y [11] <11> (Fig. 5)
(a) Loosen the three Tapping Screws (W/Flange) D4 x 16 (Black) [29] <29> and remove the Handle Cover
[17] <17>.
(b) Loosen the Machine Screws (W/Washer) M3.5 x 6 [33] <33> which tighten the lead wires from the Stator
Ass'y [11] <11> to Switch (E) (1P Screw Type) W/Lock [32] <30>.
(c) Remove the two Brush Terminals [12] <12> from the brush holder of the Housing Ass'y [21] <21>.
(d) Loosen the two Hex. Hd. Tapping Screws D5 x 55 [10] <10>.
(e) Pull out the Stator Ass'y [11] <11> while hitting the Housing Ass'y [21] <21> with a wooden mallet or
plastic hammer.
Hex. Hd. Tapping
Screw D5 x 55 [10] <10>
Handle Cover [17] <17>
Brush Terminal [12] <12>
Stator Ass'y [11] <11>
Switch (E)
(1P Screw Type)
W/Lock [32] <30>
Machine Screw
(W/Washer)
M3.5 x 6
[33] <33>
Fig. 5
--- 10 ---
Housing Ass'y [21] <21>
Tapping Screw (W/Flange)
D4 x 16 (Black) [29] <29>