STMicroelectronics STLUX385A User Manual page 12

STLUX library
Table 5. STLUX385A analog-to-digital converter (continued)
Header
ADC_PowerUp
ADC_PowerDown
ADC_Delay
ADC_Channel_Measure is the channel
number to be activated for the data
ADC_Measure
ADC_Gain_Measure is the gain factor
ADC_GetStatus
EOS: end of sequence mode bit.HW
sets this bit at the end of conversion
sequence and must be cleared by SW.
ADC_SetStatus
EOC: end of conversion mode bit. HW
conversion and must be cleared by SW.
12/21
Input parameters
ADC_Delay_Value
acquisition.
to be applied for the conversion.
This bit is white-clear.
sets this bit at the end of each
This bit is white-clear.
DocID026248 Rev 1
Output parameters
correct power-on sequence
This function returns Given a channel number and
the 16-bit value
coming from the
specified channel.
The returned data is
the current value of This function gets the current
the ADC status
register.
This function sets the current
UM1753
Functionality
This function performs the
for the ADC (after a power
down to save power).
This function performs the
correct power-down
sequence for the ADC (to
save power).
This function introduces
a delay in the following
conversion.
a gain factor, the function
returns a 16-bit value
captured by the ADC.
ADC status.
ADC status.