Preparation For Use; Wiring Instructions - Burgess BK3 Specification And Operating Instructions

..
\
,
'\
\
• 2
\
For a wide variety of applications:
Joinery, cabinet making
Model making
Household maintenance
Pattern making
Boat building
Shop fitting. exhibition and window
display
Manufacture of plastic components
Coach trimming, motor repairs.
Sandingllinishing
On a wide variety
of
materials:
Hardwoods
Softwoods
Chipboard
Mild Steel (up to 25mm thick)
Aluminium
Brass
Soft alloys (up to 75mm thick)
All plastic materials (including Formica,
Wareite, expanded polystyrene, perspex,
and thermo plastic floor tiles)
Leather
Cork
Haro rubber
Preparation for use
Wiring Instructions
The wires in the mains lead are coloured in
accordance with the following code:
GREEN ANDYELLOW: EARTH
BLUE: NEUTRAL BROWN: LIVE
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug proceed as follows:-
The wire which is coloured green-and-
yellow must be connected to the terminal
which is marked with the letter 'E' or by the
earth symbol VW or coloured green or
green-and-yellow.
THIS APPLIANCE MUSTBE EARTHED
The wire which is coloured blue must be
connected to the terminal which is marked
with the letter'N' or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter'L' or coloured red.
I!
a 13 amp (BS 1363) plug is used a 3 amp
fuse should be fitted, if any other type 01
plug is used a 5 amp fuse must be fitted