Fence Attachment - Burgess BK3 Specification And Operating Instructions

I •
14
Fence Attachment
This may be tittedto eitner the left or right
of the Saw Blade byfirst removing the
appropnateGuide Block.
When using the Fence to the left of the
Blade, assemble component parts by
following
Diagram
C.Make sure that the
Trammel Pin is facing
towards
the back of
the table and that the flat part of the rod is
facing downwards.
Diagram 0
When the fence is to be used on the rig hi
01the Saw Blade, see
Diagram D. \
Again, make sure thai the Trammel Pin
IS
facing towards the back of the table and
the flat part of the long rod is facing
upwards.
Adiust the blade and tighten the Allen·
Screw after checking the thickness of cut
you require.
.,