Table of Contents
Advertisement
DMR-ES30VP / DMR-ES30VPC
Mode name
S1 signal output
S2 signal output
Front
connection
inspection
Production Date Display Display the date when the unit was produced.
Display the accumulated
working time
Display the Error History Display the Error History stored on the unit.
Delete the Error History
Tray OPEN/CLOSE Test The RAM drive tray is opened and closed
Error code initialization
Initialize Service
Finishing service mode
Item
Description
Forcibly superimpose the S1 signal (approx.
4.5V DC) on the EE chroma signal, and check
the output on the S terminal.
Forcibly superimpose the S2 signal (approx.
2V DC) on the EE chroma signal, and check
the output on the S terminal.
Press all front keys and check the connection
between Main P.C.B. and Front P.C.B.
Display the accumulated unit's working time.
Delete Error History information stored on the
unit.
repeatedly.
Initialization of the last error code held by
timer (Write in F00)
Last Drive Error, Error history and Error
Codes stored on the unit are initialized to
factory setting.
Then VHS Microprocessor is initialized to
shipping setting too.
Release Service Mode.
FL display
(1) Each time a key is pressed,
segment turned on increases one
by one.
(2) Total umber of keys that have
been pressed.
YYY: Year
MM: Month
DD: Day
(Indicating unit: Second)
Display
reason
of error
for 5
seconds.
Display the time when the error has
occurred for 5 seconds..
Y: Year
MM: Month
DD: Day
HH: Hour
MM: Minute
Accumlated
working
time
occurring
of
the
error
is
displayed.
(Indicating unit: Second)
"*" is number of open/close cycle
times.
Display in STOP (E-E) mode.
24
Key operation
(Remote controller key)
Press [5] [2] in service mode.
Press [5] [3] in service mode.
Press [5] [4] in service mode.
Press [6] [1] in service mode.
Press [6] [4] in service mode.
Press [6] [5] in service mode.
Then press [0] [1] ~ [1] [9], the past
19 error histories are displayed.
to
left
Press [9] [7] in service mode.
Press [9] [1] in service mode
*When releasing this mode, press
the [POWER] button on Front Panel
more than 10 seconds.
Press [9] [8] in service mode.
Press [9] [9] in service mode.
Press power button on the front
panel in service mode.
Hide quick links:
Advertisement
Table of Contents
