Related Manuals for Vision TECHCONNECT TC2-HDMIIP
Summary of Contents for Vision TECHCONNECT TC2-HDMIIP
- Page 1 TECHCONNECT TC2-HDMIIP OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc2-hdmiip TC2-HDMIIP_manual_en...
-
Page 2: Declaration Of Conformity
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. All products are designed and imported into the EU by ‘Vision’ who is wholly owned by ‘Azlan Logistics Ltd.’, Registered in England Nr. 04625566 at Lion House, 4 Pioneer Business Park, Clifton Moor, York, YO30 4GH. -
Page 3: Place Of Installation
WARNING SIGNS If you detect an abnormal smell or smoke, turn this product off immediately and unplug the power cord. Contact your reseller or Vision. PACKAGING Save all packing material. It is essential for shipping in the event the unit ever needs repair. - Page 4 TRANSMITTER 5V 2A Power input HDMI Input CAT5e/6 Output Reset Button TC2-HDMIIP_manual_en...
- Page 5 RECEIVER CAT5e/6 Output Reset button 5V 2A Power input HDMI Output TC2-HDMIIP_manual_en...
-
Page 6: Installation
INSTALLATION NOTE: This product is peer to peer and must be used as a set. NOTE: A power supply is required at each end. Connect cables. Notes: CAT5e/6 cables used should be wired to IEEE-568B standard. Unshielded Twisted Pair (UTP) or Shielded Twisted Pair (STP) are both acceptable. Transmitter can connect directly to receiver without a cross-over cable. - Page 7 Change IP address of computer. On a Windows PC go Control Panel > Network and Internet > Network and Sharing Centre. Click on Local Area Network. Click Properties Select Internet Protocol Version 4 (TCP/IPv4). Click Properties. TC2-HDMIIP_manual_en...
- Page 8 Set IP address as follows: In browser enter device IP address to access the control panel. Default addresses: Transmitters (Tx) 192.168.168.55 / Receivers (Rx) 192.168.168.56 Set IP addresses for devices to: TC2-HDMIIP_manual_en...
-
Page 9: Troubleshooting
set: Tx 192.168.168.55 / Rx 192.168.168.56 set: Tx 192.168.168.57 / Rx 192.168.168.58 set: Tx 192.168.168.59 / Rx 192.168.168.60 TROUBLESHOOTING If your system is not operating properly, please refer to the following information. If the problem persists, disconnect from power and contact your AV reseller immediately. Problem Correction Yellow light flashing... -
Page 10: Specifications
SPECIFICATIONS TRANSMITTER DIMENSIONS: 110 x 58 x 26 mm (length x width x height) RECEIVER DIMENSIONS: as above PRODUCT WEIGHT: 0.48 kg per set CONSTRUCTION MATERIAL: Metal COLOUR: White TECHNICAL DETAILS: Standard: IEEE-568B Cable: CAT5/5E/6 Bandwidth: 50mbs Frame rate: 30fps HDMI format supported: 1080p @ 50/60Hz HDMI Version: partial 1.4 e.g. -
Page 11: Warranty
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale.