Minolta CL-200 Instruction Manual page 7

E
9 Slide cover
0 [SET] key ......................... • Sets the instrument into SET mode.
A [L][M] keys ...................... Use the keys to change a numeric value or move the
B [ /D-OUT] key ................. • In modes other than SET mode, use this key to out-
C [CF] key ............................ Use this key to switch use of correction factor ON or
D [CALL] key ....................... Displays relevant setting from memory.
E Tripod socket
F Receptor-head release button ........ Pressing this button detaches the receptor head from
G HOLD button
RUN position ......................... When this button is popped out, the CHROMA ME-
HOLD position ...................... When you press the button in, the CHROMA METER
H Power switch
I Battery cover
J Strap hook
K Measuring-unit selector .................. Allows selection of lx or fcd.
(Inside the battery chamber,
refer to page 8)
F
G
H
I
• Registers a numeric setting into memory.
decimal point.
put measurement data to a printer or computer.
• In SET mode, use this key to select the digit whose
value you want to change with the [L] or [M] key.
OFF, and to set the CF.
the main body.
TER takes continuous measurements.
pauses measurement operation and saves the most
recent measurement result. When you press the but-
ton again, the button pops out and measurement
resumes.
(Screen examples given in this manual are mainly for
lx.)
K
J
5