Fixed/Variable Out; Digital Audio Out - RCA SCENIUM HDLP50W151 User Manual

Main Menu Audio
0
Go Back Set the balance for the internal and external speakers using
the left and right arrows on the remote control.
1
Equalizer Presets
2
Audio Processor
3
Sound Logic
4
Audio Language
5
SAP
6
Balance Balance
7

Fixed/Variable Out

A change in this screen is applied to all inputs.
8

Digital Audio Out

Balance allows you to adjust speaker balance output. Slide
the bar left or right to adjust the speaker balance.
Main Menu Audio
0
Go Back
Variable Output, Speakers On
1
Equalizer Presets
Variable Output, Speakers Off
2
Audio Processor
Fixed Output, Speakers Off
3 Use Variable Output if volume will be controlled by the TV.
Sound Logic
Use Fixed Output when connecting to an audio receiver or
4
amplifier with its own remote control for volume control.
Audio Language
5
SAP Note: If the INTERNAL SPEAKER SOURCE switch on the back of
the TV is set to EXT AMP, it will override any above setting
6
Balance
of "Speakers Off" and allow the internal speakers to be used
as a center-audio input.
7
Fixed/Variable Out Fixed/Variable Out
A change in this screen is applied to all inputs.
8
Digital Audio Out
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Main Menu Audio
0
Go Back
Auto Select
1
Equalizer Presets
PCM
2
Audio Processor
Choosing Auto Select will send a Dolby Digital signal (when
3
Sound Logic
available) out of the DIGITAL AUDIO OUTPUT on the back of
4 the TV. If Dolby Digital is not available then a PCM signal is
Audio Language
sent out of the DIGITAL AUDIO OUTPUT.
5
SAP
Choosing PCM will always send a PCM signal out of the
6
Balance
DIGITAL AUDIO OUTPUT.
7
Fixed/Variable Out
A change in this screen is applied to all inputs.
8
Digital Audio Out Digital Audio Out
Press or to point to an option, then press OK to
select it. Press to return to the menu.
*Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Chapter 4
Using the TV's Menu System
Balance
The Balance setting applies to the internal speakers, rear external speakers, and
the headphone output. Balance does not affect any other audio output. Balance
is how much audio (loudness) gets sent to the left and right speakers.
Note: Balance setting affects only variable-volume outputs.
Fixed/Variable Out
The Fixed/Variable Out menu displays a choice list that lets you turn the TV's
front internal and external speakers on or off and set the Fixed/Variable audio
output to a fixed- or variable-control level. The choices are:
• Variable Output, Speakers On This setting turns the TV's front speakers
On and allows variable output from the TV's Fixed/Variable Audio Output
jacks. Use this setting if the TV is not connected to an audio receiver or
amplifier and the volume is controlled by the TV.
• Variable Output, Speakers Off This setting turns the TV's front speakers
Off and allows variable output from the TV's Fixed/Variable Audio Output
jacks. Use this setting if the TV is connected to an audio receiver or amplifier
and the volume is controlled by the TV.
• Fixed Output, Speakers Off This setting turns the TV's front speakers Off
and provides fixed output from the TV's Fixed/Variable Audio Output jack to
a receiver or amplifier. With the Fixed Output, the TV's volume control,
graphic equalizer, and mute are disabled. This output is ideal when
connecting to an audio receiver or amplifier that has its own remote control
for controlling the volume.
Note: If the Internal Speaker source switch on the back of the TV is set to
EXT AMP, it overrides any above setting of Speakers Off and allows the
internal speakers to be used as a center speaker input.
Digital Audio Out
If you've connected a six-channel receiver to the TV's DIGITAL AUDIO OUTPUT
jack with a digital optical cable, you can receive Dolby Digital* surround sound
if transmitted. Choose the correct setting in the Digital Audio Out menu:
• Auto Select If selected, your TV automatically chooses between Dolby
Digital and PCM based on the audio signal it is receiving. This is the best
selection if you have a decoder with Dolby Digital* and PCM that was
manufactured in the last several years.
• PCM (Pulse Code Modulation) If selected, the TV sends all signals through
the Digital Audio Output in PCM.
69