ratio : scale
BWRRS1
quick start guide
Scan for Video
start here.
• Charging the Battery
•
Open the orange USB port cover at the back of the scale.
•
Insert a micro USB cable into the port.
•
Insert the large end of the USB cable into a USB compatible outlet to
charge your scale's battery.
•
The scale will automatically turn on to verify that the charging
cord is correctly connnected. We recommend turning off the scale
manually at this time to reduce charging time.
•
When charging is finished remove USB cable from scale and replace
the port cover.
• What's in the box?
USB cord
Scale
Silicone
Insulating Pad
Clear Protective
Cover/ Tray
• Turning
Scale On
• Press the ON/OFF button once to power on the scale.
˗ Wait for scale to zero before adding weight to the platform.
˗ Scale returns to last mode used when turned on.
• The brewing ratio will display in the upper right for 3 seconds then go
blank.
˗ The last ratio that was used will be displayed.
• Components
Silicone
Pad
Platform
back of scale
LCD
Readout
front of scale
Protective Cap
USB Charging Port
• Mode Setting
•
Press "ON/OFF" button to turn on your scale. Wait until the LCD
displays zero.
•
The display will read " A " (automatic) or " M " (manual) in the
upper left of the LCD readout.
•
Press MODE button to toggle between these two modes.
interface
Coffee
Battery
MODE
Kettle
Ratio / Target
Bean Icon
Life Icon
Indicator
Icon
Weight Readout
ON/OFF
Button
MODE
Button
RATIO
TIMER
Button
"Target" Rate
Actual
Weight
Bar Segments
Weight
Unit
Readout
Timer
"Actual" Rate
Readout
Bar Segments
• Auto-off
Function
set to 180 seconds
by default
• Turn off the scale.
• Press and hold the ON/OFF button.
• While holding the ON/OFF button, press the ZERO button 4-5 times
quickly until "180" is shown on the LCD display.
• Release both buttons.
• Press the ZERO button to switch between "0/60/120/180".
• If "0" is selected, the Auto-off function will be disabled.
• After choosing the desired time, press the ON/OFF button again.
• The display will show "PASS" to confirm this setting.
• The scale will turn off automatically.
• Note: To keep a longer battery life, please turn off the scale by
pressing ON/OFF button after each use.
UNIT
Button
ZERO
Button
TIMER
Button