Completing The On Screen Setup; Choose The Menu Language; Choose The Signal Type; Complete Channel Search - RCA L26W11 User Manual

Completing the On Screen Setup

There are several options you might need to set up in order for your TV to work properly. The
fi rst time you turn on your TV, the SETUP screen appears with Language highlighted. Follow
the instructions below to complete the setup for your TV.
MAIN MENU
SETUP
Language
Ch. Setup
List & Labels
Closed Caption
Fav. Channels
Current Year
Current Month
Current Date
▼ ▲
NAVIGATE
MAIN MENU
CH. SETUP
Signal Type
Auto Search
▼ ▲
NAVIGATE START OK /
MAIN MENU
CH. SETUP
Signal Type
Auto Search
▼ ▲
NAVIGATE START OK /

What to Expect

You might notice as you change channels while using an HD receiver, the size on screen
appears different. Analog channels are sent in a 4:3 format, which can't fi ll a 16:9 screen like
your TV. Most digital channels are sent in a 16:9 format which do fi ll your screen, but not
always. It depends on how the station is formatting the video. Press the FORMAT button on
your remote to see the different formats available.
Chapter 1

Choose the Menu Language

Select your preferred language for the menu system.
English...
...
1. The default language is English. To select French or Spanish, press
...
...
...
2005...
2. Press the down arrow button on the remote to highlight Ch. Setup.
March...
16...
SELECT MAIN MENU MENU

Choose the Signal Type

In order for your TV to search for channels, you need to make sure
Cable...
OK... your signal source is set correctly.
1. With Ch. Setup highlighted, press the right arrow button to display
2. By default, the signal type is set to Cable. Leave the signal type set
SETUP MENU MENU
3. Press the down arrow button to highlight Auto Search.

Complete Channel Search

To search for all channels viewable through your antenna or cable TV
Cable...
system:
OK...
1. With Auto Search highlighted, press the OK button.
2. When the search is complete, you might want to change your
SETUP MENU MENU
Connections and Setup
the right arrow button.
the CH. SETUP menu.
to Cable if your TV is receiving its signal from cable. If your TV is
receiving its signal from an off-air antenna, press the right arrow
button again to change the option to Antenna.
Note: Depending on the number of channels you receive, it
may take several minutes for the channel search to fi nish.
channel list. Go to Chapter 3 for instructions.
If you don't want to change your channel list, the initial setup
is complete and you can press CLEAR to exit. The other setup
options are explained in Chapter 3.
9