Initial Setup; Initial Installation; Audio/Video Source Selection; Dtv Mode Operations - RCA RLDED6504A User Manual

3. Initial Setup

3.1. Initial Installation

The first time the unit is turned on or anytime the system is restored to
the defaulted settings, the Initial Installation wizard will be displayed on the
screen.
Conect the antenna cable to the RF connector at the connections panel
and follow the steps displayed on the screen to set up the system basic
settings (Language, Cable, etc.) and start an auto search of TV channels.

3.2. Audio/Video Source Selection

Turn on the TV by pressing the POWER button on TV
or on the remote control, press SOURCE and use the
direction buttons to select the desired source
/
depending on the equipment you have connected (AV,
HDMI, PC ) or choose TV to enter these mode.

3.3. DTV Mode Operations

Use CH+ or CH- buttons to tune the desired channel, or enter the channel
number directly using the numeric keypad. Press OK to display on screen the
list of TV (press the buttons to sort by group and show only the DTV,
/
the analog TV channels, etc.).
Use MTS button to select the audio language broadcasting, CC button to
show or hide subtitles on screen and FAV button to see a list of your favorite
channels.

4. SETTINGS

Source Select
TV
AV
YPbPr
HDMI1
HDMI2
HDMI3
PC
17
4.1. Customizing the PICTURE
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
to select the PICTURE.
3. Use the ▲/▼ bu ons to highlight an individual PICTURE
change the se and press the MENU
The PICTURE menu includes the following
Picture Mode Cycle among picture display modes: Standard, Dynamic,
Brightness Control the overall brightness of the picture.
Control the difference between the brightness and darkest regions of the
Contrast
picture.
Color Control the color.
Tint Controls the nt.
In crease this se ng to see crisp edges in the picture; decrease it for so
Sharpness
edges.
Color Temp. Cycles among color modes: Normal,
Advanced 1)ASPECT RATIO This feature changes the various aspects of the TV's video.
(Aspects include wide, zoom, cinema, normal).
contrast of the TV depending on the picture you are viewing.
, use the ◄/►
to exit the menu.
:
Warm, Cool.
18
to