Initial Setup; Turning The Unit On For The First Time - RCA RLDED3230A-RR Instruction Manual

PUTTING THE UNIT ON A PROPER PLACE
When you turn on your television set for
the first time, be sure to place it on a solid
stable surface.
To avoid danger, do not expose the TV
to water, or a heat source
(e.g. lamp, candle, radiator).
Do not obstruct the ventilation grid
at the rear and be sure to leave sufficient
gaps around the unit.

TURNING THE UNIT ON FOR THE FIRST TIME

After you have initially connected your TV
antenna or cable,
turn the television ON.
A screen will display asking you to run a
Channel Auto Scan
available local digital channels.
It is here where you will select antenna options
and run Channel Auto Scan
Channels will be stored in the TV tuner.
Press the MENU button on the remote control.
Using the buttons, scroll to highlight chaneel mode.
Press the button to highlight AIR/CABLE.
1. Press the
Use or button to select the options
2.
the
(TV,YPbPr/ AV , HDMI1,HDMI2,PC)
and select any of them using the
the ENTER button.
(The screen will change to your desired s
Note:
Before watching please make sure all necessary
cables and devices are connected.

INITIAL SETUP

to search and receive
.
button on the remote control.
button or
ource
Source Select
TV
YPbPr/
).
HDMI1
HDMI2/MHL
PC
13
Source Select
TV
AV YPbPr/
HDMI1
ROKU
PC
AV