Page 1
ASSEMBLY & INSTALLATION INSTRUCTIONS MODELS COVERED BY THESE INSTRUCTIONS F820593 FPFBQ395 REGENT SURROUND WHITE Focal Point Fires plc. Christchurch, Dorset BH23 2BT Tel: 01202 499330 Fax: 01202 499326 www.focalpointfires.co.uk e : sales@focalpointfires.co.uk Questions or problems with your appliance? Don’t take it back to the store...
Page 2
A S S E M B L Y I N S T R U C T I O N S GB IE Section Contents Page No. Important notes Tools required Hardware & parts list Assembly Installation Cleaning/ finishing Guarantee - terms and conditions 1.0 IMPORTANT NOTES To ensure safe and stable installation: 1.The assembled Fire Surround must be fixed / secured to the wall.
Page 3
4.0 ASSEMBLY GB IE STEP 1 Fixings Parts D x 12 PCS ① ⑦ ⑧ Gently lay both legs you have prepared onto a suitable protected surface. Be extremely careful not to scratch the front edges of the legs. DO NOT DRAG THE LEGS! Make sure that the legs are lifted everytime they are moved to avoid them from being damaged.
Page 4
4.0 ASSEMBLY - CONTINUED GB IE OPTION B Fixings Parts A x 4 PCS D x 9 PCS ④ ⑦ ④ ③ ⑧ ① ② Use the Glue (I) in the dowel holes before inserting 2 dowels (A) into the left and right hand legs. Now put a small amount of glue (I) in the dowel holes of the narrow inside leg panels (4).
Page 5
5.0 INSTALLATION GB IE Fixings E x 2 PCS F x 4 PCS G x 2 PCS H x 2 PCS With a pencil mark out the desired height where you would like the mirror brackets (H) to be situated on the rear of the legs. To avoid splitting the leg, pre drill the bracket holes with a 2mm drill bit.
Need help?
Do you have a question about the FPFBQ395 and is the answer not in the manual?
Questions and answers