How To Connect: Tv + Speakers Without A/V Receiver - RCA HD65W40 User Manual

Thomson/rca high-definition television user's guide
Hide thumbs Also See for HD65W40:
Table of Contents

Advertisement

Connections & Setup

How to Connect: TV + Speakers Without A/V Receiver

You can connect two external speakers to the TV: one to the RIGHT terminal, and one to the LEFT terminal.
1. If necessary, remove the vinyl covering from the ends of the speaker wire and twist the wire core.
2. Open the lever on the speaker terminal.
3. Insert the wire core into the hole. Be sure to connect the (+) to (+) and (-) to (-).
4. Close the lever. Pull gently on the wire to see that it's connected securely.
5. Set the SPEAKER SELECT switch to INT W/EXT SURR.
• If you connect speakers and place the EXT/INT W/EXT SURR switch on the TV back panel in the INT W/
EXT SURR position, you get audio from the internal speakers as well as L minus R from both external
speakers. This connection gives you a matrix surround effect.
• If you connect speakers and place the switch in the EXT position, you get audio from the external
speakers only. The TV's internal speakers are turned off.
6. Go to the Audio menu and Fixed/Variable Out screen and make sure Variable Out - Speakers On is selected.
Speaker wire
RIGHT
LEFT
SPEAKER
SELECT
EXT
EXTERNAL SPEAKERS
+
Back of Right Speaker
12
Notes: The external speaker rating is 8 ohms with 30 watts total power
handling capabilities.
When connecting the speaker wire, make sure you connect the positive
(+) terminal on the TV to the positive (+) terminal on the speaker. One
side of the speaker wire is usually marked with a white stripe to help you
match the terminals correctly. If the (+) and (-) terminals are not matched
properly, the speakers will not be "in phase," causing reduction in bass
frequencies.
FIXED/VARIABLE
AUDIO
OUTPUT
Do not allow the wire core to touch other wires or terminals. Damage to
components could result if the cores of two wires touch.
INT W/
R
EXT
Arrange the speakers in your TV room to achieve maximum sound
SURR
quality.
L
Caution: DO NOT connect your audio/video receiver's outputs or its
center speaker output to the red and black EXTERNAL SPEAKERS OUTPUT
on the TV. Damage to TV may result.
RIGHT
EXTERNAL SPEAKERS
VIDEO
INPUT 1
V
S-VIDEO
L/
MONO
R
AUDIO
INPUT 1
RECORD
OUTPUT
VIDEO
AUDIO
DIGITAL
AUDIO
OUTPUT
R
L
LEFT
FIXED/VARIABLE
AUDIO
OUTPUT
CENTER CHANNEL INPUT
MAXIMUM AMPLIFIER POWER RATING
SPEAKER
INTERNAL
(60 WATTS into 8 OHMS)
SELECT
SPEAKER
SOURCE
INT W/
R
EXT
EXT
SURR
TV EXT AMP
L
VIDEO
VIDEO
VIDEO
INPUT 2
INPUT 3
INPUT 4
V
V
V
P
P
R
R
S-VIDEO
L/
L/
P
L/
P
MONO
MONO
B
MONO
B
R
R
Y
R
Y
AUDIO
AUDIO
AUDIO
INPUT 2
INPUT 3
INPUT 4
ANTENNA B
ANTENNA A
INPUT
ETHERNET
G-LINK
TV
VIDEO
INPUT 5
DVI-HDTV
L/
MONO
R
AUDIO
INPUT 5
INPUT
+
Back of Left Speaker
Chapter 1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gemstar guide +

Table of Contents