Tv+ A/V Receiver Or Speakers - RCA D52W15 User Manual

TV+ A/V Receiver or Speakers

These are two different ways your TV uses a component to hear audio.
1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and to the Audio Inputs on
the A/V receiver.
• FIXED provides fixed-level audio output from the TV. This audio output is ideal for connecting to an A/
V receiver that has its own volume control.
• VARIABLE provides variable-level audio output. Volume levels can be controlled by the volume controls
on the TV and TV remote control.
2. Use speaker wire to connect the TV to external speakers.
• The EXT/INT switch beside the jacks let you turn the TV's internal speakers on or off. If you connect
external speakers, slide the switch to EXT so the audio is sent to the external speakers only. Choosing
INT sends the audio to the TV's speakers only.
Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.
Chapter 1
-OR-
CD TAPE TV
IN IN OUT IN
R
L
Y P B P R L/ MONO
L/
MONO
DVI-HDTV
R
P P L/
Y B R MONO R
COMPONENT INPUTS
COMPOSITE INPUTS
V L/ R
MONO
V L/ R
MONO
Graphics contained within this publication are for representation only.
A/V RECEIVER
VCR
IN OUT
Connect to either FIXED or
VARIABLE Output
1
R
EXT/INT
+ +
RIGHT LEFT
EXTERNAL SPEAKERS
AUDIO/VIDEO OUTPUT
FIXED AUDIO
V L R
ANTENNA/
VARIABLE
CABLE
AUDIO
SUBWOOFER L R
2
Connections & Setup
TV
9