Tv+ A/V Receiver Or Speakers - RCA D40W20 User Manual

Rca d40w20: users guide

Hide thumbs Also See for D40W20:

Table of Contents

Connections & Setup

TV+ A/V Receiver or Speakers

These are two different ways your TV uses a component to hear audio.

1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and

to the Audio Inputs on the A/V receiver.

• FIXED provides fixed-level audio output from the TV. This audio output is ideal for

connecting to an A/V receiver that has its own volume control.

• VARIABLE provides variable-level audio output. Volume levels can be controlled by

the volume controls on the TV and TV remote control.

2. Use speaker wire to connect the TV to external speakers.

• The EXT/INT switch beside the jacks let you turn the TV's internal speakers on or

off. If you connect external speakers, slide the switch to EXT so the audio is sent to

the external speakers only. Choosing INT sends the audio to the TV's speakers only.

Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.

-OR-

��

�

��

�

Graphics contained within this publication are for representation only.

��

�

��

AUDIO/VIDEO OUTPUT

��

�

��

�

��

�

��

Connect to either FIXED

VARIABLE Output

Chapter 1

Table of Contents