Garmin GNC 250 Installation Manual page 12

011-00154-00 MOUNTING RACK, (WITHOUT CONNECTORS)
Note: A mounting rack is required for approved installations.
for installation of the mounting rack, but is not provided:
#6-32 Flat Head Screw (4 ea.)
011-00313-00 CONNECTOR, (J1 and J2) Kit (GNC 250/GNC 250XL)
011-00313-01 CONNECTOR,(J1) Kit (GPS 150XL)
DATA BASE OPTIONS
010-10038-00 MEMORY CARD - WORLDWIDE DATABASE
010-10038-01 MEMORY CARD - AMERICAS DATABASE
010-10038-02 MEMORY CARD - INTERNATIONAL DATABASE
010-10032-03 MEMORY CARD - USER
MISCELLANEOUS OPTIONS
010-10075-00 PC KIT
190-00067-50 GNC 250 PILOT'S GUIDE
190-00067-51 GNC 250 QUICK REFERENCE GUIDE
190-00067-56 GNC 250 IN MOONEY M20J DOCUMENTED INSTALLATION
190-00067-60 GNC 250XL PILOT'S GUIDE
190-00067-61 GNC 250XL QUICK REFERENCE GUIDE
190-00067-66 GNC 250XL IN MOONEY M20J DOCUMENTED INSTALLATION
190-00067-80 GPS 150XL PILOT'S GUIDE
190-00067-81 GPS 150XL QUICK REFERENCE GUIDE
190-00067-86 GPS 150XL IN MOONEY M20J DOCUMENTED INSTALLATION
330-00067-00 GPS 1.57542 GHZ NOTCH FILTER
362-00014-00 WALL ADAPTER - 110 VAC
010-10057-00 28 TO 14V CONVERTER (GNC 250/GNC 250XL ONLY) (Consists of 011-00181-00)
010-10074-00 REMOTE BATTERY PACK (Consists of 011-00182-00)
THE FOLLOWING INSTALLATION ACCESSORIES ARE REQUIRED BUT NOT PROVIDED: (GNC 250/GNC 250XL ONLY)
COMM ANTENNA: BROAD BAND 50 OHM VERTICALLY POLARIZED WITH COAXIAL CABLE.
HEADPHONES: 500 OHM NOMINAL IMPEDANCE
MICROPHONE LOW IMPEDANCE CARBON OR DYNAMIC WITH TRANSISTORIZED PRE-AMP.
Av. Kit Install. Manual
190-00067-62 Rev. E
Page 12
#6-32 Self-locking Nut (4 ea.)
The following hardware is required