Advertisement
Quick Links
2 At any time, you can adjust the Strobe flash rate by pressing and holding down the "Strobe" button and
then manually adjust the Speed fader.
3 Press the "Strobe" button again to disengage the strobe effect.
Factory DeFault reset
Attention:
tHiS oPeRAtion WiLL eRASe ALL USeR-CReAteD CoLoUR
PReSetS AnD CHASeS.
1 Switch the LeD controller main power oFF.
2 Press and hold down Colour Preset buttons 1, 6 & 8 then
simultaneously switch the power switch oN then release all
buttons. All LeD indicators will flash three times to confirm that
factory settings have been restored.
technical speciFications
Power Input:
9 VDC
Power consumption: 5 Watt
connection:
3P XLr connector
DMX output:
DMX512
Dimension:
60 x 245 x 178 mm (hxwxd)
Housing:
Steel
Weigth:
1,60 kg
2007 CLS-LED BV. All rights reserved. Information subject to change without notice, CLS-LED BV and all affiliated companies disclaim liability for injury, damage
direct or indirect loss, consequential or economic loss or any other loss occasioned by the use of, inability to use or reliance on the information contained in this
manual. No part of this manual may be reproduced, in any form or by any means, without permission in writing from CLS-LED BV. Other legal information can
be found in our General conditions to be found on the back of your CLS-LED BV invoice or on our website www.cls-led.com/Conditions.pdf
1,60 kg
- 8 -
www.cls-led.com
CLS Manuals
CLS RGB LED Par Controller
CLS RGB LED Par Controller
Version 1.1 October 2009
- 1 -
www.cls-led.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Creative Lighting Solutions CLS RGB LED Par Controller
Summary of Contents for Creative Lighting Solutions CLS RGB LED Par Controller
- Page 1 CLS Manuals CLS RGB LED Par Controller 2 At any time, you can adjust the Strobe flash rate by pressing and holding down the "Strobe" button and then manually adjust the Speed fader. 3 Press the "Strobe" button again to disengage the strobe effect.
- Page 2 3. Set your scene with reD, GreeN, bLUe & MASter faders to the desired setting. thank you for selecting the CLS rGb LeD Par Controller. the CLS rGb LeD Par Controller is an universal controller that allows you to easely control a set of rGb LeD Par's.
- Page 3 CLS Manuals CLS RGB LED Par Controller CLS Manuals CLS Atmosphere LED-panel record custom colour presets Functions 1. enter record mode as described above. 2. Adjust the reD,GreeN, bLUe & MASter faders to set the Colour Scene as desired. • rGb LeD Controller •...
- Page 4 CLS Manuals CLS RGB LED Par Controller CLS Manuals CLS Atmosphere LED-panel operation Pressing a selected chase button a second time will disengage the relevant chase. Adjust the “MASter” fader to set the overall output intensity. • Connect the controller’s DMX output to the DMX input of your first LeD rGb fixture in line. Connect the DMX output of the first fixture to the input of the next fixture.
Need help?
Do you have a question about the CLS RGB LED Par Controller and is the answer not in the manual?
Questions and answers