ASROCK Z270M-STX MXM User Manual page 40

Z270M-STX MXM / B250M-STX MXM
Step 4
Move the standoff based on the
module type and length.
A
B
The standoff is placed at the nut
location A by default. Skip Step 4 and
5 and go straight to Step 6 if you are
going to use the default nut.
Otherwise, release the standoff by
hand.
Step 5
Peel off the yellow protective film on
the nut to be used. Hand tighten the
A
B
standoff into the desired nut location
on the motherboard.
Step 6
Align and gently insert the M.2
(NGFF) SSD module into the M.2
B A
slot. Please be aware that the M.2
(NGFF) SSD module only fits in one
orientation.
A
C B
Step 7
Tighten the screw with a
screwdriver to secure the
module into place. Please do
B
NUT2 NUT1
not overtighten the screw as
this might damage the module.
35