Advertisement
6
Start firmware update
a. Press INFO (WPS) key to start the update.
(Update process may take up to 10 minutes)
If "
*
UPDATE SUCCESS
exit from Advanced Setup. Your AV receiver is ready for normal use.
Caution
DO NOT interrupt power during the update.
In case the power is accidentally cut off resulting in a condition where you can't recover normal operation, refer to
the troubleshooting method (Troubleshooting CASE 2) on the last page.
b. When completed, "
c. Turn off the power of the receiver by pressing the MAIN ZONE
MAIN ZONE key
USB port
7
Check the updated firmware version
a. Power on the AV receiver and press the ON SCREEN key on the remote control.
b. Select "Information" > "System".
c. Confirm that the firmware version is updated to the latest version.
Congratulations!
You have completed the firmware update. Your AV receiver is ready for normal use.
" appears, this means your receiver is already up-to-date. In this case, power off to
Firmware update in progress
" , "
UPDATE SUCCESS
" and "
PLEASE...
POWER OFF!
key.
INFO (WPS) key
(The design may differ by models.)
" appears on the display.
ON SCREEN key
5
Advertisement
