NETGEAR ReadyNAS 2120 Hardware Manual page 61

5. Press and release the Reset button to scroll through the boot menu modes.
The storage system shows the boot mode options using the Power LED, Health LED, and the Disk Drive
Activity and Fault LEDs (A&F LEDs) for disks 1 through 7 (for information about LEDs and disk numbering,
see Front Panel on page 53), as described in the following table:
Boot Mode Status Indicators
Description
Boot menu Power and Health LEDs blink
and all A&F LEDs are solid
red.
Normal A&F LED disk 1 is solid red.
Factory A&F LEDs disks 1 and 2 are
default solid red.
OS reinstall A&F LEDs disks 1 through 3
are solid red.
Tech A&F LEDs disks 1 through 4
support are solid red.
Volume A&F LEDs disks 1 through 5
read only are solid red.
Memory A&F LEDs disks 1 through 6
test are solid red.
Test disk A&F LEDs disks 1 through 7
are solid red.
Legend:
•
Solid:
•
Blinking:
•
Off:
6. Press and hold the Reset button to confirm your boot menu selection.
The system boots in the selected boot mode.
ReadyNAS OS 6
Power Health Disk Drive Activity and Fault LEDs
LED LED
Disk 1
ReadyNAS 3312 and 4312
61
Disk 2 Disk 3 Disk 4 Disk 5 Disk 6 Disk 7