System Settings - Gazer F117 User Manual

DATE/TIME
POWER ON
DELAY
POWER OFF DELAY
AUTO POWER OFF
BEEP SOUND
SCREEN OFF
KEYBOARD
BACKLIGHT
TV MODE
FLICKER
LANGUAGE
FORMAT
DEFAULT SETTING
FW VERSION
Using the PHOTO button you can take the photo.
Note: Press the • REC button to resume the recording once you
finish adjusting the settings.
Settings menu

System settings

YY/MM/DD; HH:MM:SS
Date and time setting.
Prior to using the MVR, it is recommended to set the exact
date and time and regularly check the correctness of these
settings. Time format used: 24-hour (Hour: Minute: Second).
Date format (Year: Month: Day).
Off; 10 seconds; 20 seconds; 30 seconds.
Setting the power on timeout a specified period.
Off; 10 seconds; 20 seconds; 30 seconds.
Setting the power off timeout after a specified period.
Off; 3 Minutes; 5 Minutes; 10 Minutes.
When this item is set and the device is in the standby mode,
if no operation to device, after a specified period, device will
automatically shut off.
Off; On.
Key sounds activation.
Off; 30 seconds; 60 seconds.
Setting the automatic screen timeout after a specified period.
Auto; Off; On.
Set the key light function.
When set «Auto», the key light on/off will synchronize with
LCD screen, when LCD screen is on, key light will be on,
when LCD screen is off, key light will be off. LCD screen could
be shut off by «Up Button» manually or menu setting «Power
Off Screen». LCD screen could be on by any button. When
this value set to «On», the key light will be on all the time
after device is powered on. When this value set to «Off», key
light will be off all the time.
NTSC; PAL.
Output video signal standard.
50 Hz; 60 Hz.
Setting built in video camera parameters.
In CIS and Europe, the use of 50 Hz frequency is recommended.
The recommended frequency for USA is 60 Hz.
Menu language selection.
Memory card formatting.
Cancel; OK.
Reset all settings to defaults.
Firmware version display.
ENG
13