Preparing Child Restraint - Cosco Pronto Instruction Manual

C-1 Preparing Child Restraint
NOTE:
Depending on your model, you may need to assemble you
booster seat. Skip this section if already assembled.
Do not use this child restraint without the
seat pad. Failure to do this can result in
serious injury.
Separate the backrest/headrest from the base. See section C-4.
Remove the pad from the plastic bag.
1.
Attach Base Seat Pad
Slide base pad onto the
front of the base. Doing
one side at a time, slide
the elastic strap over the
armrest.
2.
Wrap Elastic Straps
Under Base as Shown
3.
Pull Pad Down and
Around Cup Holder
9
To use the booster seat with backrest/headrest, follow
all of the instructions below to attach the seat back.
A
B
4.
Attach Arm Covers
(on select models)
Slide armrest covers over
armrests.
5.
Attach Elastic To Tab
Attach the elastic on back
of armrest cover to bottom
of base.
6.
If the back of the
headrest pad has a sewn
on plastic strip (A),
follow steps 7a-7d and
steps 8-10.
If the headrest pad does
not have the plastic
strip (B), skip to steps
7e-10.
10 continued on next page.