Copying Content From A Dvd+R Or Dvd+Rw Disc To A Vcr Videocassette - RCA DRC8000N User Manual

Chapter 6: Additional Information
DVD Recorder
Coaxial cable
To cable or antenna

Copying content from a DVD+R or DVD+RW disc to a VCR videocassette

The following instructions are provided for a general connection in case you might want to copy content from a disc you recorded to a
VCR videocassette.The back of your TV and VCR probably don't exactly match the ones shown here. In general, you just need to connect
the DVD Recorder's Output jacks to the VCR's Input Jacks. Also, you need to be able to see what your copying, so the TV needs to be
connected.
1. Connect the DVD Recorder to the VCR. Connect a set of audio/video cables to the DVD Recorder's OUTPUT VIDEO (yellow), AUDIO L
(white), and AUDIO R (red) jacks, to the VCR's Input Jacks (sometimes labeled VIDEO and AUDIO L and R).
2. Connect the VCR to the TV. Connect an RF coaxial cable to the OUT TO TV jack on the VCR and to the IN FROM CABLE/ANTENNA jack
on the TV.
3. Make sure all of the components (TV,VCR, and DVD Recorder) are plugged into working power outlets.
4. Turn on all of the components.
5. Tune the TV to channel 3 or 4 (depending on the whether the VCR's 3/4 switch is set to 3 or 4).
6. Change the channel on the VCR to its Video Input Channel (sometimes called LINE or LINE INPUT).
7.
Insert the DVD+R or DVD+RW disc you want to copy to a videocassette into the DVD Recorder.
8. Insert a working videocassette tape into the VCR.
9. Press the RECORD button on the VCR.
10. Start playback on DVD Recorder.
NOTE: Copy-protected content, such as pre-recorded DVD titles, cannot be recorded, copied, or duplicated.
60
INPUT
VIDEO
L
RF ANTENNA/CABLE AUDIO
INPUT
R
OUT TO TV
IN FROM ANTENNA
VCR
IN FROM
CABLE/ANTENNA
TV
Graphics contained within this publication are for representation only.
OUTPUT
VIDEO
L
S-VIDEO S-VIDEO
AUDIO
IN OUT
R
L
R
INPUT
OUTPUT
COMPONENT
VIDEO OUTPUT
Y
Pb
G-LINK
DIGITAL AUDIO
OUT
Pr
PROG.
SCAN
COAXIAL OPTICAL
IR SAT
ON OFF