Table of Contents
Advertisement
Assembly Steps
8
7
View mirrors
Dashboard
● Fit the view mirror into the hole in the vehicle body and push until you hear it click into place.
● Repeat for the other side.
● Fit the dashboard assembly against the vehicle and keep the steering shaft pass through the
hole in the dash.
● Plug the Red and Black wires connecotr on the dash into the Red and Black wires connector on
the vehicle (image 8-1), plug the Yellow wires connecotr on the dash into the Yellow connector on
the vehicle (image 8-2).
● Insert four Ø4x12 screws and tighten with a screwdriver.
9
Steering shaft
● Use a screwdriver to remove the battery cover and insert two dry(AA) batteries, replace the
battery cover.(image 9-1)
NOTE: The product does not included dry(AA) battery.
● Remove the M5x45 machine screw and
● Insert the steering wheel onto the end of the steering shaft.
● Insert the M5x45 machine screw through the steering wheel and steering shaft, and tighten
Ø
the
5 nut. (image 9-2)
8
Steering wheel
Ø
5 nut from the steering wheel.
Ø4x12 screws
Ø5 nut
8-1
8-2
9-1
9-2
M5x45
machine screw
Advertisement
Table of Contents
