Connecting The Drive To Your Computer - Toshiba STOR.E ALU TV KIT 2.5" User Manual

Connecting the drive to your
computer
1. USB 3.0 Micro-B connector
2. Power/Data indicator light
This hard disk drive is intended for use with a TV or set-top box. In
NOTE addition, you can also use it with your PC. Please note that switching from
TV to PC usage or vice versa can cause reformatting of the HDD and you
may lose all your data. Therefore, make sure that you have a backup of
your data, as Toshiba is not responsible for data corruption or data loss.
1. With your computer powered on and fully booted up, plug the USB 3.0
Standard-A connector into a USB port of your host system, or an active
USB HUB.
You may need USB 3.0 Express Card Host Controller for your computer if
NOTE the computer doesn't have USB 3.0 port. You also can connect the device
to USB 2.0 port of your computer, However the transfer rate will be
downgraded to that of USB 2.0.
2. Now, plug the USB 3.0 micro-B connector into the corresponding port of
the drive itself.
Immediately,
■
■
■
User's Manual
1
2
the Power/Data indicator light will illuminate
the drive will power up
the drive should mount and a new drive icon should appear in "My
Computer"
STOR.E ALU TV KIT 2.5"
3 4
3. USB 3.0 Standard-A connector
4. USB 3.0 host
backward compatible to USB 2.0
EN-6